Tender requirements for the supply of intermodal semi-trailers
Huckepack
Semi-trailer with a length of 13.62 in the Mega o standard
internal height 3000mm
Dimensions and weights
Length of buildings in St.C. 13.620 mm Total weight
(admission/tech) 36,000/39,000 kg
Clear construction width
approximately 2,480 mm
Load capacity (permission/tech) 29,007/32,007 kg
Front wall height approx. 2,550 mm Load of the axle assembly
(admission/tech) 24,000/27,000 kg
Building height at the front in ca. 2,900 mm Load
saddles (admission/tech) 12,000/12,000 kg
Clear construction height approximately 2,900 mm
Curb weight +/- 3% 6.993 kg
Side height incl. front approx. 2,750 mm
Coupling height unloaded approximately 982 mm
Side height incl. at the back approx. 2,750 mm
Riding suspension height 260 mm
Total height at the front without load approx. 4.002 mm
Wheelbase 7,700 mm
Total height at the rear without load approx. 4.002 mm
Wheel size 445/45R19.5
Internal height adjustable
At max. 3,000 mm
Chassis
Traffic authorization/Plates
2 marking boards at the rear 565×200 ECE-R70 vertically on
back wall
Country of approval “POLAND”
The vehicle meets EU type requirements; Certificate of Conformity
(CoC)
The vehicle is approved for rail transport up to a speed of 140
km/h (XL Code)
Codification with ILU and technical code
nameplate
Cargo securing certificate as sticker foil
inside on the right rear door.
without international customs seal
Chassis
Holder for 2 spare wheels as a winch in front of the axles
10 years warranty against rust for galvanized parts
fire (see warranty conditions)
Wheelbase 1310/1310 mm
Outer frame with edge for attaching tarpaulin and 3 pairs
sockets for stakes
4 gripping edges for rail loading onto wagons
Load securing holes in the outer frame
Side anti-entry protection
Anti-entry cover
King pin 2″ according to SAE standard, replaceable, 1 position
king pin 1690mm
Axes
Chassis system for 19.5″ (disc brakes)
Brake disc diameter approx. 370mm
3 x SCB axle 9 t, SP2040, FM1300, offset 120 disc brakes
370mm
Wheel mounting by centering according to DIN 74 361 part 3
Suspension
3 x Air suspension
Braking system
Dual circuit, pneum. braking system, with couplings
standard
Steel air tanks
EBS 2S/2M with stabilization program
EBS power supply via ISO 7638 + CAN socket
Brake cylinder – double diaphragm
Valve for raising and lowering the chassis with a function
AUTO-RESET
2 wheel chocks
Parking supports
JOST parking stands, semi-circular feet, operation
one-sided
Lighting installation
Lighting installation 24V with multi-component lamps.
2 7-pole plug sockets 1xDIN ISO37 and 1xDIN 1185 and 1 socket
15-pole plug DIN ISO 12098
One-piece rear light bracket, white, low
suspended, no embossing
LED side marker lighting coupled with turn signals
1 pair of LED rear marker lights
Wheels and tires
Mark
Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone tires
Tires for regional transport (M + S)
6x 445/45R19.5 (14.00×19.5)
6 x Steel rims, offset 120
Protective covers for wheel bolts
fenders
2 x Additional straight plastic fenders between
axes
Plastic mudguards – simple
Splash guards
Other chassis equipment
Fixing eyes: 5 pairs of 2 t and 11 pairs of 4 t with durability
ear according to EN 12640
Plastic tool box in front of the axles
PALET-STOP profile on both sides at the side frame, height 19mm
width between 2460mm
Steel bumper cover at the rear of the vehicle
Holder for light and brake connectors at the front of the vehicle
1 access ladder that extends from the rear
Cargo securing certificate
Load securing: body certified according to EN 12642
XL
with a certificate for transporting beverages
With Daimler 9.5 certificate incl. for transporting drinks
Building
Box body
Box construction
Headwall
Front wall with steel posts, steel protective sheet
inside height 350mm
An additional element of galvanized front wall reinforcement
steel sheet, height 350mm
Center and corner posts
3 pairs of reinforced stanchions with 5 patch pockets
Corner posts at the back, extendable on both sides, approx. 450 mm
Back wall
2 steel posts at the rear with integrated tarpaulin tensioner
2-leaf aluminum doors at the installation height, 2 each
door leaf closures
Roof control lever on the rear doors
Floor
Floor made of 28mm board, max. trolley axle load 7100 kg,
strength according to DIN EN 283
The floor is sealed around and between the joints of the floor slabs
400 mm anti-abrasion sheet on the last floor slab
Sliding roof frame
Sliding roof, profile height 180mm
Internal width 2480mm, lifting roof trolley
Construction with adjustable front/rear height 2×50 mm
The roof is retractable and can also be moved backwards, which is necessary
loosening the front roof tarpaulin
The roof is lifted manually using integrated actuators
in the corner posts